Program Listing for File rp2040_arduino_platform.h

↰ Return to documentation for file (src/rp2040_arduino_platform.h)

#ifdef ARDUINO
#pragma once

#include "arduino_platform.h"

#include "Arduino.h"

#ifdef ARDUINO_ARCH_RP2040

#ifndef USE_RP2040_EEPROM_EMULATION
    #ifndef KNX_FLASH_OFFSET
        #define KNX_FLASH_OFFSET 0x180000   // 1.5MiB
        #pragma warning "KNX_FLASH_OFFSET not defined, using 0x180000"
    #endif
#endif

#ifdef USE_RP2040_LARGE_EEPROM_EMULATION
    #define USE_RP2040_EEPROM_EMULATION
#endif

#ifndef KNX_SERIAL
    #pragma warn "KNX_SERIAL not defined, using Serial1"
    #define KNX_SERIAL Serial1
#endif

#ifdef KNX_IP_LAN
    #if ARDUINO_PICO_MAJOR * 10000 + ARDUINO_PICO_MINOR * 100 + ARDUINO_PICO_REVISION < 30700
        #pragma error "arduino-pico >= 3.7.0 needed"
    #endif
    #define KNX_NETIF Eth

    #include "SPI.h"
    #include <W5500lwIP.h>

#else
    #include <WiFi.h>
    #define KNX_NETIF WiFi
#endif

#if USE_KNX_DMA_UART == 1
    #define KNX_DMA_UART uart1
    #define KNX_DMA_UART_IRQ UART1_IRQ
    #define KNX_DMA_UART_DREQ DREQ_UART1_RX
#else
    #define KNX_DMA_UART uart0
    #define KNX_DMA_UART_IRQ UART0_IRQ
    #define KNX_DMA_UART_DREQ DREQ_UART0_RX
#endif

#if USE_KNX_DMA_IRQ == 1
    #define KNX_DMA_IRQ DMA_IRQ_1
#else
    #define KNX_DMA_IRQ DMA_IRQ_0
#endif


class RP2040ArduinoPlatform : public ArduinoPlatform
{
    public:
        RP2040ArduinoPlatform();
        RP2040ArduinoPlatform( HardwareSerial* s);

        // uart
        void knxUartPins(pin_size_t rxPin, pin_size_t txPin);
        void setupUart() override;
        bool overflowUart() override;
#ifdef USE_KNX_DMA_UART
        int uartAvailable() override;
        void closeUart() override;
        void knxUart( HardwareSerial* serial) override {};
        HardwareSerial* knxUart() override
        {
            return nullptr;
        };
        size_t writeUart(const uint8_t data) override;
        size_t writeUart(const uint8_t* buffer, size_t size) override
        {
            return 0;
        };
        int readUart() override;
        size_t readBytesUart(uint8_t* buffer, size_t length) override
        {
            return 0;
        };
        void flushUart() override {};
#endif


        // unique serial number
        uint32_t uniqueSerialNumber() override;

        void restart();

#ifdef USE_RP2040_EEPROM_EMULATION
        uint8_t* getEepromBuffer(uint32_t size);
        void commitToEeprom();

#ifdef USE_RP2040_LARGE_EEPROM_EMULATION
        uint8_t _rambuff[KNX_FLASH_SIZE];
        bool _rambuff_initialized = false;
#endif
#else

        // size of one EraseBlock in pages
        virtual size_t flashEraseBlockSize();
        // size of one flash page in bytes
        virtual size_t flashPageSize();
        // start of user flash aligned to start of an erase block
        virtual uint8_t* userFlashStart();
        // size of the user flash in EraseBlocks
        virtual size_t userFlashSizeEraseBlocks();
        //relativ to userFlashStart
        virtual void flashErase(uint16_t eraseBlockNum);
        //write a single page to flash (pageNumber relative to userFashStart
        virtual void flashWritePage(uint16_t pageNumber, uint8_t* data);

        // writes _eraseblockBuffer to flash - overrides Plattform::writeBufferedEraseBlock() for performance optimization only
        void writeBufferedEraseBlock();
#endif


#if defined(KNX_NETIF)
        uint32_t currentIpAddress() override;
        uint32_t currentSubnetMask() override;
        uint32_t currentDefaultGateway() override;
        void macAddress(uint8_t* addr) override;

        // multicast
        void setupMultiCast(uint32_t addr, uint16_t port) override;
        void closeMultiCast() override;
        bool sendBytesMultiCast(uint8_t* buffer, uint16_t len) override;
        int readBytesMultiCast(uint8_t* buffer, uint16_t maxLen, uint32_t& src_addr, uint16_t& src_port) override;

        // unicast
        bool sendBytesUniCast(uint32_t addr, uint16_t port, uint8_t* buffer, uint16_t len) override;

#define UDP_UNICAST _udp
    protected:
        WiFiUDP _udp;
    protected:
        IPAddress mcastaddr;
    protected:
        uint16_t _port;
#endif
    protected:
        pin_size_t _rxPin = UART_PIN_NOT_DEFINED;
    protected:
        pin_size_t _txPin = UART_PIN_NOT_DEFINED;

    protected:
        IPAddress _remoteIP = 0;
    protected:
        uint16_t _remotePort = 0;
};

#endif
#endif // ARDUINO